Basket #35
$4.99
840108-00
Basket lid #33
$1.99 $0.49 On Sale!
840106-02
Basket separation grid #34
$1.99 $0.49 On Sale!
840107-00
Canister O-Ring #28
$7.99
840327-00
The Canister O-ring completes the seal between the motor and the filter canister. Air bubbles or canister leaking are signs you need to replace this seal. On averages seals need to be relaced every 18-36 months.
Canister clip & hinge #36
$6.99
841555-00
Filstar Bio-Chem Stars 20 Ct.
$19.95
731A
Bio-Chem Stars are a biological filtration medium that provides a substrate for the optimal growth of beneficial bacteria. Their internal pore structure is formed under a patented process that creates a 50-70 micron internal pore network. This pore size is optimal for the growth of beneficial bacteria, including nitrifying bacteria that remove toxic ammonia and nitrite. It also allows the best oxygen and water transfer through the star, which keeps bacterial colonies healthy and active. Because of this complete internal colonization, Bio-Chem Stars are the most efficient biological filter medium available for use in FilStar Canister Power Filters and Rena SmartFilters.
Filstar Bio-Chem Zorb Pouch
$13.95
725A
Often described as activated carbon on steroids, Bio-Chem Zorb is a unque blend of ion-exchange resins, scavenger resins and activated carbon. This provides the ultimate in organic filtration wtih added benefit of not leaching phosphate into the tank. The pouch is an exact replacement for the original pouch included with the XP Filter.
Filstar Ceramic Rings
$20.95
732A
Ceramic Rings are specially designed for use in all FilStar filters. They have a higher cumulative pore volume per liter than standard biological media used in most canister filters. Their highly porous, hollow design effectively distributes water flow and allows massive colonies of beneficial bacteria to grow on and inside each ring, creating an ideal "biological filter." FilStar Ceramic Rings create the ideal substrate for the growth of nitrifying bacteria that remove toxic ammonia and nitrite from aquarium water. They will not break down in the filter or alter pH or water hardness.
Filstar Dual Density Micro Filter (2pk)
$9.99
734A
Dual-density microfilter pads are the final stage in the mechanical filtration of the aquarium with the Rena Filstar external filters. These will remove the smallest of particulate matter and are used to "polish' the water. These dual-layer pads will last twice as long as the standard micro-filter. Each pad is two layers with coarse density fibers in one layer for trapping larger particles and a finer denisity which traps the smallest debris. This design allows the larger particles to be trapped in the first layer while the second layer traps the remaining finer particles. The benefit is that the bottom layer is able to trap more particles before saturation which reduces the frequency of cleaning and overall filter maintenance.
Filstar Flexible Tubing 5ft (x2) #1
$24.95
841619-00
The replacement tubing for the Rena XP Filters consists of two 5 foot lengths. These two tubes are the
original tubing that comes with the XP1, XP3 and XP4.
The inner diameter is 16mm and the outer is 21mm. This is approximately 5/8" id by 3/4" od. This tubing
is specially formulated for use with the Rena Filstar XP filter system. It does not contain any chemicals that
can leech into the tank and cause pollution. The tubing is also formulated with a high silicone content to remain
soft and pliable for a longer period of time while not kinking.
Filstar Foam 20ppi 2 pk
$9.99
723A
20 pores per inch foam is the first filter in the system and should be placed in the bottom of the bottom basket as the water is filtered from the bottom up. This is an exact 2 pack replacement for the factory filters included in the Rena Filstar XP Filters.
Filstar Foam 30ppi 2 pk
$9.99
724A
30 pores per inch foam is the second filter and will trap finer particles than the 20 ppi foam. These filters should be placed on top of the 20 ppi foam. This is an exact 2 pack replacement for the factory filters included in the Rena Filstar XP Filters.
Filstar Micro Filtration Pads (3pk)
$9.99
733A
The microfilter pads are the final stage in the mechanical filtration of the aquarium with the Rena Filstar external filter. These will remove the smallest of particulate matter and are used to "polish' the water.
Filstar Nitra Zorb Pouch
$12.95
726A
Nitra-Zorb is the first water filtration medium that removes ammonia, nitrite and nitrate in freshwater aquariums. Nitra-Zorb is a blend of natural and synthetic ion-exchange resins that selectively removes ammonia, nitrite and nitrate. Nitra-Zorb, when used in new aquariums, controls the level of toxic ammonia and nitrite during the initial development of the biological filter. In established aquariums, Nitra-Zorb helps control sudden spikes in ammonia and nitrite from the addition of new fish or anytime ammonia or nitrite is detected.
Filstar Phos Zorb Pouch
$9.99 $6.99 On Sale!
727A
Phos-Zorb is a special filtration material that selectively removes phosphate and silicate, common nutrients found in fresh and saltwater aquariums. In saltwater aquariums, excess phosphate lowers the available calcium and magnesium necessary for the growth of hard corals and other invertebrates.
Filstar Super Activited Carbon Pouch
$13.95
729A
The highest grade of activated carbon made especially for filtering aquarium water. It has 5 times the adsorptive power of standard charcoal. Super Activated Carbon removes dissolved organic waste that stresses tropical fish and discolors aquarium water.
Filstar Water Softener Pillow Pouch
$13.95
728A
The Water Softener Pillow removes hard water minerals and toxic heavy metals from aquarium water. It consists of a special "pillow" that fits into the RENA Filstar Canister Filter, providing continuous removal of minerals and heavy metals. Providing an aquarium with softer water improves fish health and can prevent unsightly mineral deposits from forming on the aquarium surfaces. Many fishes, such as tetras, angelfish and South American cichlids prefer the soft water common to the Amazon River Basin, (50 to 100 pm GH, typically). The Water Softener Pillow helps to re-create the soft water found in many tropical areas of the world where aquarium fish come from. Maintaining a stable aquarium environment is much easier when using the Water Softener Pillow.
Filstar XP Inlet Extensions (H) 2pk
$5.99 $3.99 On Sale!
ACC840602
Additional inlet extensions can be used to increase the intake length for deeper tanks. They can also be used to increase the length of the discharge tube (you will lose the "Click Connect" feature) to reach deeper into tanks that that are not completely filled such as reptile environments or mixed species habitats. *TECH NOTE* This item replaces item# 841563-00 (4 pack) of the intlet extensions. 841563-00 is no longer available.
Filstar Zeolite Ammonia Remover Pouch
$7.99 $5.99 On Sale!
730A
For chemical neutralizaton of ammonia, zeolite is an excellent choice. Zeolite Ammonia Remover is a natural ammonia-removing mineral for use in freshwater aquariums. It works well in both newly set-up aquariums to help prevent "new tank syndrome" and in established aquariums to prevent sudden "surges" in ammonia. Zeolite Ammonia Remover is fully rechargeable and works in all types of freshwater aquariums.
Flexible Tubing Clamps (2pk) (M)
$5.99
981903-00
These one-way locking clamps will secure the flexible tubing to both the inlet and outlet pipe and the canister tubing barbs on the quick disconnect. Made of non-rusting plastic.
Impeller cover #32
$9.99
841554-00
Inlet Pipe (F)
$9.99 $3.99 On Sale!
841562-00
The inlet pipe allows the unit to be primed and for water to drawn from the aquarium into the canister filter. This is version two and it will work with the original accessories also with some minor modifications.
Inlet Pipe Cap (G) or (#11)
$0.99
980712-00
Replacement cap for the intake/priming tube. This cap seals the priming tube when not in use and prevents loss of suction (prime) on the intake side which will stop your filter from circulating the water in the aquarium.
Inlet Strainer (I) ACC840603
$6.99
840112-01
The inlet strainer attaches to the inlet extension and prevents gravel and other debris from clogging the filter. It is recommended to mount the strainer no closer than 4 inches from bottom of the aquarium to avoid disturbing the gravel in the bottom of the aquarium.
Outflow Regulator (D)
$5.99
841547-01
The outflow regulator allows for precise control of water discharged into the tank. The power jet nozzle or spraybar can be used with the flow regulator. The venturi system which was an option on the original system has been removed on the new system and is no longer available.
Outlet Extension Short (C)
$9.99
841560-00
Two outlfow extensions can be attached to the discharge tube of the Rena Filstar filters. The short extension will discharge about 2 inches from the top of the tank.
Outlet Extension Tall (long) (B)
$12.95 $6.99 On Sale!
841559-00
The taller outlet extension will discharge about 6 inches from the top of aquarium.
Outlet Pipe (A)
$19.95
840127-00
This is newer color-coded version and is only outlet pipe now available. The elbow is fused to the pipe and connects to either the short or long outlet extension.
Power Jet Nozzle (J)
$3.99 $0.99 On Sale!
840132-00
The power jet nozzle can be used to direct the water dicharged from the filter to increase aeration in the tank by agitating the surface of the aquarium.
Priming Funnel #9 or (P)
$2.99 $0.99 On Sale!
840135-00
The priming funnel is used on initial setup to prime the system for startup. It is only needed on initial setup and when the inlet and outlet tubes are emptied.
Qick-Disconnect O-Rings (x2)#27
$7.99
841556-00
The quick-disconnect Orings prevent leaking around the inlet and outlet stems of the Quick-disconnect unit when inserted into the top of the motor and when the filter is operating. Water leaking from the cord area is a symptom of this problem as is air leaking into the canister when the filter is operating.
Quick-Disconnect with O-Rings #23
$39.95
841543-00
The Quick-Disconnect is a unique valve system that holds the water in the inlet and outlet tubes when removed from the top of the unit. This allows the canister, filters and motor to be cleaned, re-attached and the unit started up without re-priming. This is a real time saver during regular maintenance.
Rena Filstar XP Manual and Literature
$2.99 $0.99 On Sale!
XPMAN
Rena Filstar XP1 Canister with Feet and Basket
$48.95 $29.77 On Sale!
720C1
The canister replacement for the Rena Filstar XP1 external canister filter consists of the outer canister, inner filter basket and rubber feet. To avoid breaking the canister brackets when attaching and closing the top of the filter to the canister always start with an empty canister and let the aquarium fill the canister. Make sure when replacing the basket assembly that the basket is lined up and nested to each other correctly. Also make sure the basket assembly is seated properly in the bottom of the canister. Failure to do so will result in broken clip(s) or broken bracket(s)on the canister itself.
Rena Filstar XP2 Canister with Feet and Baskets
$51.95 $34.77 On Sale!
721C1
The canister replacement for the Rena Filstar XP1 external canister filter consists of the outer canister, inner filter basket and rubber feet. To avoid breaking the canister brackets when attaching and closing the top of the filter to the canister always start with an empty canister and let the aquarium fill the canister. Make sure when replacing the basket assembly that the basket is lined up and nested to each other correctly. Also make sure the basket assembly is seated properly in the bottom of the canister. Failure to do so will result in broken clip(s) or broken bracket(s)on the canister itself.
Rena Filstar XP3 Canister with Feet and Baskets
$71.95 $43.77 On Sale!
722C1
The canister replacement for the Rena Filstar XP3 external canister filter consists of the outer canister, inner filter baskets and rubber feet. To avoid breaking the canister brackets when attaching and closing the top of the filter to the canister always start with an empty canister and let the aquarium fill the canister. Make sure when replacing the basket assembly that the basket is lined up and nested to each other correctly. Also make sure the basket assembly is seated properly in the bottom of the canister. Failure to do so will result in broken clip(s) or broken bracket(s)on the canister itself.
Rena Filstar XP4 Canister with Feet and Baskets
$82.95 $59.77 On Sale!
723C1
The canister replacement for the Rena Filstar XP4 external canister filter consists of the outer canister, inner filter baskets and rubber feet. To avoid breaking the canister brackets when attaching and closing the top of the filter to the canister always start with an empty canister and let the aquarium fill the canister. Make sure when replacing the basket assembly that the basket is lined up and nested to each other correctly. Also make sure the basket assembly is seated properly in the bottom of the canister. Failure to do so will result in broken clip(s) or broken bracket(s)on the canister itself.
Replacement Shaft for XP Filter
$5.99
431005-00
Rubber foot #37
$3.99
840101-00
Set of Inlet and Outlet Accessories & Tray
$49.95
841564-00
This is the complete inlet/outlet accesory tray that comes with the Rena Filstar XP external filter system. This is version 2 and includes the new color coded inlet outlet accessories.
Shaft bearing #30 for XP Filters and 35
$5.99
440308-00
The shaft bearing is located in the bottom of the rotor well and dampens any sound vibrations caused by the spinning rotor from transmitting to the motor and also stabilizes the rotor shaft.
Spraybar (E)
$11.99
841561-00
This is a one-piece spraybar that securely attaches to the dishcarge tube or flow control valve. The spraybar discharges water into the aquarium more slowly than the power jet nozle and is ideal for tanks with species that live in calmer waters.
Suction Cup Clamps (4pk) (L)
$5.99
840138-00
These brackets attach to the inlet/outlet tubes. These brackets then attach to the suction cups which hold the inlet/outlet pipes to the glass.
Suction cups(x4) Medium
$6.99
ACC840600
Medium suction cups are used with all Rena Heaters, Micro-Bubblers and version 1 of the Rena Filstar XP canister filters inlet/outlet accessory packs.
XP Suction Cups/Clips (K)&(L) 6pk
$9.99
ACC840611
These are the original suction cups and clips (KeyCodes K&L)that come packed in the trays with new XP filters. Now packed in a convenient 6 pack (6 cups, 6 clips). This replaces individual items (K)981617-00 and (L)840136-00.
XP/1 Rotor, shaft, bearing #20
$29.95 $25.95 On Sale!
ACC840608
Original factory replacement of the rotor/impeller assembly. Includes a new shaft and bearing/bushing. The rotor is the magnet part of the motor that spins. Attached to this is the impeller which are blades that catch and pump the water out of the filter and back to the tank. If you have the rotor/impeller assembly with bearings at both ends you can purchase these bearings separately, item 440308-00.
XP/2 Rotor, shaft, bearing #21
$29.95 $25.95 On Sale!
ACC850601
Original factory replacement of the rotor/impeller assembly. Includes a new shaft and bearing/bushing. The rotor is the magnet part of the motor that spins. Attached to this is the impeller which are blades that catch and pump the water out of the filter and back to the tank. If you have the rotor/impeller assembly with bearings at both ends you can purchase these bearings separately, item 440308-00.
XP/3 Rotor, shaft, bearing #22
$29.95 $25.95 On Sale!
ACC860601
Original factory replacement of the rotor/impeller assembly. Includes a new shaft and bearing/bushing. The rotor is the magnet part of the motor that spins. Attached to this is the impeller which are blades that catch and pump the water out of the filter and back to the tank. If you have the rotor/impeller assembly with bearings at both ends you can purchase these bearings separately, item 440308-00.
XP/4 Rotor, shaft, bearing
$29.95
ACC870601
Original factory replacement of the rotor/impeller assembly. Includes a new shaft and bearing/bushing. The rotor is the magnet part of the motor that spins. Attached to this is the impeller which are blades that catch and pump the water out of the filter and back to the tank. If you have the rotor/impeller assembly with bearings at both ends you can purchase these bearings separately, item 440308-00.
XP1 Motor & O-Rings #24
$65.95
841550-00
Original replacement motor for the Rena Filstar XP1 and includes a canister Oring, impeller cover seal/Oring. It does not include the Quick Disconnect Unit or rotor/impeller.
XP2 Motor & O-Rings #25
$77.95
851505-00
Original replacement motor for the Rena Filstar XP2 and includes a canister Oring, impeller cover seal/Oring. It does not include the Quick Disconnect Unit or rotor/impeller.
XP3 Motor & O-Rings #26
$88.95
861505-00
Original replacement motor for the Rena Filstar XP3 and includes a canister Oring, impeller cover seal/Oring. This does not include the rotor/impeller assembly which is sold as a separate part. Replacing the motor generally does not improve performance unless you replace the rotor/impeller at the same time.
XP4 Motor & O-Rings
$109.95
871505-00
This motor assembly is the top part of the XP4 and includes both the canister Oring and impeller cover seal/Oring. The motor usually does not need replacing as long as the impeller turns when the unit is plugged in. The unit does not include parts ACC870601 rotor impeller and 841554-00 impeller cover.
Impeller Cover Seal/O-Ring #29
$7.99
841632-00
This is the seal on the bottom of the motor that prevents water from the aquarium bypassing the filter material. It is a strip of sealing material that fits in the groove on the bottom of the motor. Generally, this does not need replacing and will not solve any leaking problems. Replace when worn or there is a large gap between the ends.