Outlet Pipe (A)
$11.99
840127-00
This is newer color-coded version and is only outlet pipe now available. The elbow is fused to the pipe and connects to either the short or long outlet extension.
Outlet Extension Tall (long) (B)
$10.99
841559-00
The taller outlet extension will discharge about 6 inches from the top of aquarium.
Outlet Extension Short (C)
$9.99
841560-00
Two outlfow extensions can be attached to the discharge tube of the Rena Filstar filters. The short extension will discharge about 2 inches from the top of the tank.
Outflow Regulator (D)
$5.99
841547-01
The outflow regulator allows for precise control of water discharged into the tank. The power jet nozzle or spraybar can be used with the flow regulator. The venturi system which was an option on the original system has been removed on the new system and is no longer available.
Spraybar (E)
$11.99 $9.99 On Sale!
841561-00
This is a one-piece spraybar that securely attaches to the dishcarge tube or flow control valve. The spraybar discharges water into the aquarium more slowly than the power jet nozle and is ideal for tanks with species that live in calmer waters.
Inlet Pipe (F)
$7.99
841562-00
The inlet pipe allows the unit to be primed and for water to drawn from the aquarium into the canister filter. This is version two and it will work with the original accessories also with some minor modifications.
Inlet Pipe Cap (G) or (#11)
$0.99
980712-00
Replacement cap for the intake/priming tube. This cap seals the priming tube when not in use and prevents loss of suction (prime) on the intake side which will stop your filter from circulating the water in the aquarium.
Filstar XP Inlet Extensions (H) 2pk
$5.99
ACC840602
Additional inlet extensions can be used to increase the intake length for deeper tanks. They can also be used to increase the length of the discharge tube (you will lose the "Click Connect" feature) to reach deeper into tanks that that are not completely filled such as reptile environments or mixed species habitats. *TECH NOTE* This item replaces item# 841563-00 (4 pack) of the intlet extensions. 841563-00 is no longer available.
Inlet Strainer (I) ACC840603
$6.99
840112-01
The inlet strainer attaches to the inlet extension and prevents gravel and other debris from clogging the filter. It is recommended to mount the strainer no closer than 4 inches from bottom of the aquarium to avoid disturbing the gravel in the bottom of the aquarium.
Power Jet Nozzle (J)
$3.99
840132-00
The power jet nozzle can be used to direct the water dicharged from the filter to increase aeration in the tank by agitating the surface of the aquarium.
Suction Cups (4pk) (K)
$5.99
981617-00
These oversized suction cups will securely attach your inlet/outlet pipes to aquarium.
Suction Cup Clamps (4pk) (L)
$5.99
840138-00
These brackets attach to the inlet/outlet tubes. These brackets then attach to the suction cups which hold the inlet/outlet pipes to the glass.
Flexible Tubing Clamps (2pk) (M)
$5.99
981903-00
These one-way locking clamps will secure the flexible tubing to both the inlet and outlet pipe and the canister tubing barbs on the quick disconnect. Made of non-rusting plastic.
Priming Funnel #9 or (P)
$2.99
840135-00
The priming funnel is used on initial setup to prime the system for startup. It is only needed on initial setup and when the inlet and outlet tubes are emptied.
Set of Inlet and Outlet Accessories & Tray
$49.95
841564-00
This is the complete inlet/outlet accesory tray that comes with the Rena Filstar XP external filter system. This is version 2 and includes the new color coded inlet outlet accessories.
Flexible Tubing Deluxe 6.5ft (x2) #1
$24.95
871600-00
The Deluxe replacement tubing for the Rena XP Filters consists of two 6.5 foot lengths. These two tubes are the
original tubing that comes with the XP4. This tubing will fit all Rena Filstar XP filters including the XP1, XP2 and XP3. Many owners of the XP1-3 will be able to get 4 replacement tubes out of one
set of tubing making it a much better value than the standard replacement tubing.
The inner diameter is 16mm and the outer is 21mm. This is approximately 5/8" id by 3/4" od. This tubing
is specially formulated for use with the Rena Filstar XP filter system. It does not contain any chemicals that
can leech into the tank and cause pollution. The tubing is also formulated with a high silicone content to remain
soft and pliable for a longer period of time while not kinking.
Quick-Disconnect with O-Rings #23
$39.95
841543-00
The Quick-Disconnect is a unique valve system that holds the water in the inlet and outlet tubes when removed from the top of the unit. This allows the canister, filters and motor to be cleaned, re-attached and the unit started up without re-priming. This is a real time saver during regular maintenance.
Qick-Disconnect O-Rings (x2)#27
$7.99 $4.99 On Sale!
841556-00
The quick-disconnect Orings prevent leaking around the inlet and outlet stems of the Quick-disconnect unit when inserted into the top of the motor and when the filter is operating. Water leaking from the cord area is a symptom of this problem as is air leaking into the canister when the filter is operating.
XP Suction Cups/Clips (K)&(L) 6pk
$9.99
ACC840611
These are the original suction cups and clips (KeyCodes K&L)that come packed in the trays with new XP filters. Now packed in a convenient 6 pack (6 cups, 6 clips).
Suction cups(x4) Medium
$6.99
ACC840600
Medium suction cups are used with all Rena Heaters, Micro-Bubblers and version 1 of the Rena Filstar XP canister filters inlet/outlet accessory packs.
Inlet Pipe Extension (4pk) (H)
$8.99
841563-00
Additional inlet extensions can be used to increase the intake length or they can also be used to increase the length of the discharge tube to reach deeper into tanks that that are not completely filled such as turtle tanks. A two pack is also available item ACC840602
Rena Filstar XP Manual and Literature
$2.99
XPMAN