Pump Base Fits 300/600/40/40T/900/1100
$2.99
400111-11
This medium pump base works with many older discontinued Rena Pump models including the 15, 20, 40 and 40 Turbo. Works as a mounting bracket or base with newer Rena Flow models 300/600/900/1100.
Replacement Shaft for XP Filter
$5.99
431005-00
Shaft bearing #30 for XP Filters and 35
$1.99
440308-00
The shaft bearing is located in the bottom of the rotor well and dampens any sound vibrations caused by the spinning rotor from transmitting to the motor and also stabilizes the rotor shaft.
Rotor Shaft for 850/1250/4000/6000/705K/705L
$7.99
441009
Ceramic replacement shaft fits all of the larger Rena Flow models including Rena Flow 4000, 6000 and the Pond Care models 850 (item 705K), 1250 (item 705L. A new shaft and bearing is included when purchasing replacement rotors for these pumps, items RTR4000 and RTR6000.
Suction cups(x4) Medium
$6.99
ACC840600
Medium suction cups are used with all Rena Heaters, Micro-Bubblers and version 1 of the Rena Filstar XP canister filters inlet/outlet accessory packs.
Suction cup feet fits small Rena Pumps ADE300-02
$1.29
AP6846
The small Rena suction is deeper than most suction cups on the market resulting in both a secure fit on smooth surfaces and excellent vibration dampening. Approximately 3/4" diameter the suction cup foot will fit almost all smaller rena pumps produced in the last 20 years. Including discontinued models 10, 15, 20, 40 and 40 Turbo. These feet are standard on Rena Flow pump models including 80/300/320B/95/400/160 and 600. It will also fit Pond Care models 705A/705B/705G.
Rubber bearings for 20/15 series pumps
$0.29
C2005
The bearings/bushings attach to either end of the rotor/impeller shaft and hold the shaft tight and centered in the rotor/impeller chamber. These bearings will fit many of the older discontinued Rena pumps including Rena models 15, 20, 40, 40-Turbo and the newer models in the Rena Flow series including the 900 and 1100.
Shafts for 20/15 series pumps
$0.99
C2006
This ceramic shaft replaces the shaft found on older discontinued Rena models including the 15 and 20 models.
Complete Rotor for C-20/S20/S20-V
$4.99
C2065
This rotor/impeller assembly with fit all Rena model 20 pumps and return the pump to optimal performance for flow and lift.
O' Ring for 40/40 Turbo Fits 900 & 1100 also
$1.29
C4004
This O'ring is used to seal the impeller cover of the 40/40 Turbo/900/1100 to the front of the pump and make the rotor/impeller chamber water tight. Made of EPDM rubber approximately 2" in diameter.
Shafts for 40/40T series pumps
$0.99
C4006
Ceramic shaft for discontinued Rena models 40/40 Turbo only.
Complete Rotor for C/S40
$9.99
C4065
This is the complete rotor/impeller assembly and includes rotor/impeller, shaft and two bearings. Fits model 40 only. Can be used with the 40 Turbo but with reduced flow.
Replacement O' Ring for 60 Pump
$1.99
C6004
This O'ring is used with the impeller cover to seal the rotor/impeller area.
Replacement Ceramic Shaft for 60 Pump
$1.99
C6066
LongDescription:This is the replacement impeller shaft for all models of Rena 60 pump. This pump was made from the late 1980's until 2000. This pump was used both the pond filter and aquarium version product the J60.
Rotor/Impeller assembly for RF1100 (M5) and S40 Turbo pumps
$18.95
RTR1100
This rotor fits the Rena Flow 1100 pump UL MOD# M5. In addition, it will also fit the discontinued Rena S40 Turbo model pump. The assembly consists of stainless shaft, two bearing/bushings and rotor/impeller.
Rotor for RF1500 -M2(S)- #ADE042-01
$18.95
RTR1500
This rotor fits the Rena Flow 1500 pump UL MOD# M2(S). In addition, it will also fit the Pond Care 350 item 705C. The assembly consists of stainless shaft, bearing/bushing and rotor/impeller.
Rotor for RF2000 #ADE043-01
$19.95
RTR2000
This rotor fits the Rena Flow 2000 pump UL MOD# M2(S). In addition, it will also fit the Pond Care 450 item 705D. The assembly consists of stainless shaft, bearing/bushing and rotor/impeller.
Rotor for RF300 (P300A) #ADE300-01
$3.99
RTR300
This rotor fits all model Rena Flow 300 pumps including RF300B/RF300C/RF300S/RF300S-B/RF300S-IL and Pond Care 80 item# 705A. UL MOD# P300A
Rotor for RF400 (P400A) #ADE400-01
$4.99
RTR400
This rotor fits all model Rena Flow 400 pumps including RF400B/RF400C/RF400S/RF400S-B/RF400-9V and Pond Care 95 item# 705G. UL MOD# P400A.
Rotor for RF4000 -M3(S)- #ADE044-01
$23.95
RTR4000
This rotor fits the Rena Flow 4000 pump UL MOD# M3(S). In addition, it will also fit the Pond Care 850 item 705K. The assembly consists of ceramic shaft, bearing/bushing and rotor/impeller.
Rotor for RF600 (P600A) #ADE600-01
$8.99
RTR600
This rotor fits all model Rena Flow 600 pumps including RF600B/RF600C/RF600S/RF600S-B/RF600S-IL and Pond Care 160 item# 705B. UL MOD# P600A.
Rotor for RF6000 -M3(S)- #ADE045-01
$29.95
RTR6000
This rotor fits the Rena Flow 6000 pump UL MOD# M3(S). In addition, it will also fit the Pond Care 1250 item 705L. The assembly consists of ceramic shaft, bearing/bushing and rotor/impeller.
Rotor/Impeller assembly for RF900 (M4) pumps
$15.95
RTR900
This rotor fits the Rena Flow 900 pump UL MOD# M4. The assembly consists of stainless shaft, two bearing/bushings and rotor/impeller.