Our AE180 is a heavy-duty compact pump that features a combination flow-control with bottom intake resulting in a powerful, energy efficient pump that fits almost any small to medium statuary piece and is an ideal middle range pump for use in fountains, aquariums and general fluid transfer needs. This pump has been optimized for pumping height and will lift higher than most pumps in this size range. The pump requires a minimum water level of 2 in. Three (3) year warranty, UL approved for indoor and outdoor use. 

Specifications:

• Max Flow: 180 gph
• Max Lift: 4.5 ft
• Outlet OD: 1/2"
• Watts: 8.5
• Dimensions in: 3.5L x 2.25W x 3.25 H
• Cord Type: UL 3 wire w/grnd
• Cord Length: 6'
• Warranty: 3 yr

Rena no longer makes water pumps for the North American market. This product has been discontinued but we have received a limited supply of the Rena Flow 300S with 3 wire grounded cord. Another very similiar pump is the ARTEICH 65.

The Rena Flow 300 is the ideal pump for ap applications where space is at a premium but water volume is small. The RF300S with three wire cord is discontinued and replaced with the RF300C which has a 2 prong plug.

The unique combination flow control and intake is mounted low on the pump allowing the pump to function in as little as 1/2” inch. of water. The flow control has an infinite number of settings for precise water control. Each pump has a built-in strainer, four high-strength suction cups for the base and an optional use filter foam. Five (5) year warranty, UL approved for indoor and outdoor use.

Specification:

• Output: 80 gph Lift: 2.0 ft
• Dim in: 2.75L x 2.125W x 1.75H
• Outlet OD: 3/8 in.
• Watts: 6 Amps: .12
• Flow Control: Dial
• Cord: 6 ft. 2 wire UL

  ---

     
  
  Rena Flow 300 Fountain Pump (P300A) DISCONTINUED $39.95 RF300S
  Quantity

  Rena no longer makes water pumps for the North American market but we have received a limited supply of this pump. This product has been discontinued. A very similar pump is the AT-65. Parts are still available for this product in our water pump parts section.

  The Rena Flow 300 is the ideal pump for applications where space is at a premium but water volume is small. The unique combination flow control and intake is mounted low on the pump allowing the pump to function in as little as 1/2” inch. of water. The flow control has an infinite number of settings for precise water control. Each pump has a built-in strainer, four high-strength suction cups for the base and an optional use filter foam. Five (5) year warranty, UL approved for indoor and outdoor use.

  Specification:

  • Output: 80 gph Lift: 2.0 ft
  • Dim in: 2.75L x 2.125W x 1.75H
  • Outlet OD: 3/8 in.
  • Watts: 6 Amps: .12
  • Flow Control: Dial
  • Cord: 6 ft. 3 wire w/grnd

  ---

     
  
  Rena Flow 300C In-Line DISCONTINUED $39.95 RF300C-IL
  Quantity
  This pump has been discontinued and is no longer available. We have received a limited supply of the RF300SIL which may be substituted.

  The Rena Flow 300C in-line is the ideal pump for applications where space is at a premium but water volume is small. The RF300C-IL replaces the RF300S-IL and is fitted with a two prong plug. The in-line capability allows the pump to be fitted with either a filter or tubing. The pump can be operated both in the water or externally (in-line) if fitted with tubing. Flow can be controlled by either turning the intake on the front or with an optional control valve on the discharge outlet (item FC-300) included. Five (5) year warranty.

  Specifications:

  • Output: 80 gph Lift: 2.3 ft
  • Dim in: 2.25L x 2.875W x 2.375H
  • Outlet OD: 3/8 in. or 1/2 in
  • Watts: 5 Amps: .10
  • Flow Control: Front or Discharge

  ---

     
  
  Rena Flow 300 In-Line (P300A) DISCONTINUED $39.95 RF300S-IL
  Quantity

  Rena no longer makes water pumps for the North American market. This product has been discontinued but we have received a limited supply. Parts are still available for this product in our water pump parts section.

  The Rena Flow 300 in-line is the ideal pump for applications where space is at a premium but water volume is small. The in-line capability allows the pump to be fitted with either a filter or tubing. The pump can be operated both in the water or externally (in-line) if fitted with tubing. Flow can be controlled by either turning the intake on the front or with an optional control valve on the discharge outlet (item FC-300) included. Five (5) year warranty, UL approved for indoor and outdoor use.

  Specifications:

  • Output: 80 gph Lift: 2.3 ft
  • Dim in: 2.25L x 2.875W x 2.375H
  • Outlet OD: 3/8 in. or 1/2 in
  • Watts: 5 Amps: .10
  • Flow Control: Front or Discharge

  ---

     
  
  Rena Flow 400 Fountain Pump DISCONTINUED RF400B
  Quantity

  Rena no longer makes water pumps for the North American market. This product has been discontinued although parts are still available in our parts department.

  Recommended Replacements at our affiliate Frog Pond Aquatics:
  Rena Flow 320B
  ARTEICH AA-125
  ARTEICH AA-85

  Our affiliate web site also has a complete selection of fountain pumps
  which you can view here: Fountain Pumps

  ---

     
  
  Rena Flow 400 (P400A) DISCONTINUED RF400S

  Quantity

  Rena no longer makes water pumps for the North American market. This product has been discontinued although parts are still available in our parts department.

  Recommended Replacements:
  ARTEICH AT-125
  ARTEICH AT-65

  Our affiliate web site also has a complete selection of fountain pumps
  which you can view here: Fountain Pumps

  ---